LPO

LPO is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

Categories：

Organic peroxide

+86-16639322519

icason001@icason.com

LPO
	Molecular formula	C24H46O4
	Molecular weight	398.6
	CAS NO.	105-74-8
	UN NO.	3106
	EINECS.	203-326-3
Chemical name	Dilauroyl peroxide

Brief Introduction:

LPO is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

Half Life Data:

10hr,Half Life Temp...........61℃

1hr,Half Life Temp...........79℃

1min,Half Life Temp..........117℃

Specification:

Appearance	White Powder
Assay	98.0% min.
Bulk density at 20℃	460kg/m³
Density	1.06g/cm³
Melting point range	53-55℃ (127-131°F)
SADT	50℃
Emergency temperature	45℃

Application:

·Mainly used in suspension polymerization of vinylchloride, with temperature range from 50 to 70℃ and the suggestion dosing ratio is 0,1 to 0,3 phr

·Can be used as Polymerization of acrylates and methacrylates with temperature range from 60 to 90℃.

·It also be used for the polymerization of vinylidenchloride

Package and Storage:

20kg or 25kg, net, inner PE bag with outer paper carton.

Below 30℃ stored under shadow, good air circulation. Keep in original containers hold the water content.

FAQ

What is organic peroxide?

Organic peroxide is a compound containing a peroxide functional group (-O-O-) attached to an organic molecule (containing carbon). These compounds are highly reactive due to the weak O-O bond, which easily breaks, releasing free radicals. They are often used as initiators in polymerization processes and in various industrial applications.

What are organic peroxides used for?

Organic peroxides are widely used as polymerization initiators, curing agents for resins, and crosslinking agents for elastomers and thermoplastics.

What should be noted when storing organic peroxides?

Organic peroxides are oxidizing and flammable substances and must be handled with caution. They should be stored in a cool, well-ventilated area with containers kept tightly closed, away from heat sources and open flames, and should not come into contact with rust. Keep them away from reducing agents, heavy metals, alkali metals, desiccants, accelerators, and other flammable chemicals. Product weighing should not be carried out inside the storage area. Always follow the storage temperature indicated on the product label.

Can you supply Custom synthesis service?

Yes, of course! With our dynamic group of dedicated and skilled people we can meet the needs of our customers worldwide, to develop customize specific catalyst according to the different chemical reactions, - in many cases in cooperation with our customers - that will enable you to lower your operating costs and improve your processes.

Key words:

Get A Quote

Leave your contact information and get a free product quote

Submit

Application Areas

EPS

EVA

Silicone Rubber

Products

BPO 75%

BPO 75% is a wet granular of diacyl peroxide, used as initiator of polymerization in expandable polystyrene(EPS),acrylic resins and curing agent for unsaturated polyester resin and elastomers.

BIPB

BIPB is a white to yellowish powder or flake,Insoluble in water, partly dissolving in ethanol, ether, benzene, carbon tetrachloride and other organic solvents.

DCP

Dicumyl peroxide is white crystalline.Melting point of 41-42℃. Relative density of 1.082.Decomposition temperature 120-125℃ room temperature stable. Gradually become yellowish under light. insoluble in water, soluble in ethanol, ether,acetic acid, benzene and petroleum ether.

BPO 50% Paste

BPO 50% paste is a fine dispersion of dibenzoyl peroxide in a smooth,non-separating fire resistant creamy paste form,which can be easily dissolved in resins and monomers.This product is less hazardous and easier to use than technical or dry forms of dibenzoyl peroxide.Slightly soluble in alcohols,petroleum solvents,insoluble in chlorinated solvents.

Phone/WhatsApp:

+86-16639322519

Email:

icason001@icason.com

About Us

Changzhou JOHO Chemical Co., Ltd., a subsidiary of Shanghai ICASON New Material Co., Ltd., represents the Group's strategic focus on polymer crosslinking, curing, and initiation technologies.