DCP

Dicumyl peroxide is white crystalline.Melting point of 41-42℃. Relative density of 1.082.Decomposition temperature 120-125℃ room temperature stable. Gradually become yellowish under light. insoluble in water, soluble in ethanol, ether,acetic acid, benzene and petroleum ether.

BIPB

BIPB is a white to yellowish powder or flake,Insoluble in water, partly dissolving in ethanol, ether, benzene, carbon tetrachloride and other organic solvents.

BPO 75%

BPO 75% is a wet granular of diacyl peroxide, used as initiator of polymerization in expandable polystyrene(EPS),acrylic resins and curing agent for unsaturated polyester resin and elastomers.

BPO 50% Paste

BPO 50% paste is a fine dispersion of dibenzoyl peroxide in a smooth,non-separating fire resistant creamy paste form,which can be easily dissolved in resins and monomers.This product is less hazardous and easier to use than technical or dry forms of dibenzoyl peroxide.Slightly soluble in alcohols,petroleum solvents,insoluble in chlorinated solvents.

BPO 50% Powder

BPO 50% powder is a fine, free-flowing, non-caking granular powder consisting of 50% dibenzoyl peroxide, phthalate ester plasticizer and standardized with silica,which can be easily and fast dispersed and dissolved in unsaturated polyester and acrylic resins.Even at a very low temperature a good cure can be available. Dissoluble in alcohol,esters,ethers,olefins and organic solvents. Insoluble in water.

DCBP

DCBP is a white to yellowish viscouspaste diacyl organic peroxide cross-linkingagent of silicone rubber with 150-400'℃ hot air without pressure.

DBPH

DBPH is a low volatility, yellowish liquid, dialkyl peroxide for cross linking of elastomers (silicone rubber, EPDM, PE etc.). Mp8 ℃, relative density 0.8650, refractive index 1.4185 (28 ℃), flash point: closed/36 ℃, open/ 58 ℃,self-accelerating decomposition temperature /80℃. not soluble in water, soluble in alcohols, esters, ethers, hydrocarbons and organic solvents, has a special smell. Active oxygen Content 11.02%.

DTBP

DTBP is a liquid dialkyl peroxide. It is an efficient initiator for polymerization of olefins and acrylic resins,and a modification agent of PP degradation, insoluble in water, soluble in organic solvents such as toluene, acetone, styrene,etc. Freezing point lower than-30℃.

TBHP

ICASON®TBHP-70 is a volatility, yellowish liquid, alkyl hydroperoxide initiator for polymerization of acrylic emulsion, and widely used as raw material for organic peroxides synthesis.

TBPB

TBPB is an efficient initiator for the ethylene polymerization under high pressure in bothautoclave and tubular processes,also suitable for crosslinking of EPDM rubber compounds atambient temperature within some weeks.

MEKP

MEKP is a methyl ethyl ketone peroxide formulation for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures.

DTAP

DTAP is clear liquid,it is an excellent polymerization initiator of LDPE and Acrylic resins.its main decomposition products: teramyl alcohol, isobutene, methane, ethane, butanone,etc

TBEC

TBEC is a colorless transparent liquid, mainly used as the initiator for the (co)polymerization of ethylene, styrene, butadiene, acrylate and methyl acrylate.

CHP

CHP may be used for various polymerization reactions. It can be used in emulsion,solution and bulk polymerizations.In emulsion processes,it may be activated by organic-soluble or water-soluble reducing agents, or by metal compounds to achieve polymerization at room temperature or lower.

LPO

LPO is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.